BGWGK - XUPER 22*33N WELDING ROD
- MSDS: BGWGK
- Manufacturer: EUTECTIC CORP
- Product Name: XUPER 22*33N WELDING ROD
- National Stock Number: 3439-12-303-3710
Product Identification
Product ID:XUPER 22*33N WELDING ROD
MSDS Date:09/04/1987
FSC:3439
NIIN:12-303-3710
MSDS Number: BGWGK
Responsible Party
FLUSHING, NY 11358
Emergency Phone: 718-358-4000
Info Phone: 718-358-4000
Cage: EO060
Contractor
Telephone: 704-527-9800/ 800-221-1433
Cage: EO060
Ingredients
NICKEL
CAS: 7440-02-0
RTECS: QR9500000
OSHA PEL 1MG/M*3
ACGIH TLV: 1MG/M*3
IRON
CAS: 7439-89-6
RTECS: NO4565500
OSHA PEL 10MG/M*3(FE*2O*3)
ACGIH TLV: 5MG/M*3(FE*2O3)
STRONTIUM CARBONATE
CAS: 1633-05-2
OSHA PEL NOT ESABLISHED
GRAPHITE, NATURAL
CAS: 7782-42-5
RTECS: MD9659600
OSHA PEL 15 MPPCF RDUST
ACGIH TLV: 2 MG/M3 RDUST; 9293
FLUORPAR
CAS: 14542-23-2
OSHA PEL 2.5MG/M*3(FLUORIDES)
ACGIH TLV: 2.5MG/M*3(FLUORIDES)
CALCIUM CARBONATE (MARBLE) (LIMESTONE)
CAS: 1317-65-3
RTECS: EV9580000
OSHA PEL 15 MG/M3 TDUST
ACGIH TLV: 10 MG/M3 TDUST; 9192
ALUMINUM
CAS: 7429-90-5
RTECS: BD3300000
OSHA PEL 5MG/M*3(FUME)
ACGIH TLV: 5MG/M*3(FUME)
SODIUM SILICATE
CAS: 6834-92-0
RTECS: VV9275000
OSHA PEL 15MG/M*3(NUIS.DUST)
Hazards
Routes of Entry: Inhalation:YES Skin:YES Ingestion:NO
Reports of Carcinogenicity:NTP:YES IARC:YES OSHA:NO
Health Hazards Acute and Chronic:ACUTE:METALLIC TASTE,NAUSEA,TIGHTNESS
OF CHEST,FEVER,DIZZINESS,DRYNESS,IRRITATION OF EYES,NOSE,THROAT.
CHRONIC:EXCESSIVE LEVELS MAY CAUSE BRONCHIAL ASTHMA,LUNG
FIBROSIS,PNEUMOCONIOSIS.
Explanation of Carcinogenicity:NICKEL IS PROBABLE CARCINOGENIC BY
IARC,ANTICIPATED CARCINOGEN BY NTP.
Effects of Overexposure:SEE HEALTH HAZARDS.
Medical Cond Aggravated by Exposure:AGGRAVATION OF EXISTING RESPIRATORY
OR ALLERGIC CONDITIONS.HIGHER LEVELS OF LUNG RELATED PROBLEMS AMONG
SMOKERS.
First Aid
First Aid:REMOVE FROM EXPOSURE AND OBTAIN PROMPT MEDICAL ATTENTION. IF
NOT BREATHING,GIVE CPR.IF UNCONSCIOUS,GIVE OXYGEN. EMPLOY FIRST AID
TECHNIQUES RECOMMENDED BY AMERICAN RE CROSS.
Fire Fighting
Extinguishing Media:USE MEDIA APPROPRIATE FOR SURROUNDING FIRE.
Unusual Fire/Explosion Hazard:WELDING ARCS AND SPARKS CAN IGNITE
COMBUSTIBLE PRODUCTS.
Accidental Release
Spill Release Procedures:CLEAN UP ANY GRINDING DUST OR WASTE RESIDUE
AND PLACE IN APPROPRIATE DOT APPROVED DISPOSAL CONTAINER.
Handling
Other Precautions:TRAIN WELDER TO KEEP HIS HEAD OUT OF THE FUMES.
MONITOR AIR TO ENSURE ACCEPTABLE EXPOSURES. AVOID ELECTRICAL SHOCK
BY MAINTAINING DRY WORK AREA.
Exposure Controls
Respiratory Protection:FUME RESPIRATOR OR AIR SUPPLIED RESPIRATOR IN
CONFINDED SPACES OR WHERE VENTILATION DOES NOT KEEP EXPOSURE BELOW
TLV.
Ventilation:LOCAL EXHAUST TO MAINTAIN BELOW TLV.
Protective Gloves:WELDER'S GLOVES.
Eye Protection:HELMETS OR FACE SHIELD WITH FILTER LENS
Other Protective Equipment:SUBSRTANTIAL DARK CLOTH,ARM
PROTECTOR,APRON,HAT,SHOULDER PROTECTION.
Work Hygienic Practices:WASH HANDS THOROUGHLY BEFORE
EATING,SMOKING,USING SANITARY FACILITIES.
Supplemental Safety and Health
Chemical Properties
HCC:N1
Solubility in Water:INSOLUBLE
Appearance and Odor:WELDING ROD.NO ODOR.
Stability
Stability Indicator/Materials to Avoid:YES
Hazardous Decomposition Products:FUMES OF METALS AND METAL
OXIDES,CO,NO*2,O*3,FLUORIDES.
Disposal
Waste Disposal Methods:DISPOSE OF FUMES,FLUX OR WELD GRINDING RESIDUE
FROM THE WIRK AREA OR FROM FILTERS IAW APPLICABLE FEDERAL,STATE AND
LOCAL REGULATIONS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.